How does the combustion chamber design ensure adequate mixing of fuel and air to improve combustion efficiency and reduce pollutant emissions?

Innovative design promotes uniform mixing
Traditional combustion chambers often have uneven mixing problems during the mixing process of fuel and air, resulting in incomplete combustion, which not only reduces combustion efficiency but also increases pollutant emissions. To solve this problem, the company has developed a new combustion chamber structure that uses multi-stage vortex and premixing technology to achieve full mixing of fuel and air before combustion.

In the combustion chamber of the scrubber heating boiler, the fuel is sprayed out in the form of atomization or gasification through a precisely designed nozzle. At the same time, the multi-stage vortex generator guides the air to form a strong vortex motion, so that the fuel and air are fully contacted and mixed in the vortex. In addition, the combustion chamber is also equipped with a premixing chamber, where the fuel and part of the air are mixed in advance to form a uniform premixed gas, further improving the mixing effect. This design combining multi-stage vortex and premixing ensures that the fuel and air reach the best mixing state in the combustion chamber, laying a solid foundation for efficient and clean combustion.

Precise control to optimize the combustion process
In addition to mixing uniformity, precise control of the combustion process is also the key to improving combustion efficiency and reducing pollutant emissions. By introducing an advanced combustion control system, the company has achieved real-time monitoring and adjustment of parameters such as temperature, pressure, and oxygen content in the combustion chamber.

The combustion control system can automatically adjust parameters such as fuel supply, air flow, and ignition timing based on the monitored data, so that the combustion process is always in the best state. At the same time, the system also has adaptive learning capabilities and can make intelligent adjustments according to the combustion requirements under different working conditions to ensure the maximization of combustion efficiency and the minimization of pollutant emissions.

Significant environmental benefits, leading the green development of the industry
After actual testing, the scrubber heating boiler adopts this new combustion chamber design. The combustion efficiency of the combustion equipment is nearly 20% higher than that of traditional equipment, while the emissions of pollutants such as nitrogen oxides (NOx) and carbon monoxide (CO) are greatly reduced, reaching the international leading level. This achievement not only brings significant economic benefits to the company, but also makes important contributions to environmental protection.

With the increasingly stringent environmental protection regulations and the continuous improvement of public environmental awareness, efficient and clean combustion technology has become an inevitable trend in the development of industrial combustion equipment. The new combustion chamber design launched by the company this time is in line with this trend and leads the new direction of green development in the industry through technological innovation.